Green Wiki
Line 8: Line 8:
 
* Energy Efficient Window Film
 
* Energy Efficient Window Film
 
* <span style="font-style: normal; ">Fixing or Replacing Leaky Air Ducts</span>
 
* <span style="font-style: normal; ">Fixing or Replacing Leaky Air Ducts</span>
 
* <span style="font-style: normal; ">Fixing Air or Thermal Leaks</span>
  +
* <span style="font-style: normal; ">Energy Efficient Lighting</span>
 
* Energy Efficient Furnace or Air Conditioning
 
* Energy Efficient Furnace or Air Conditioning
  +
* Finding & Fixing Air or Thermal Leaks
 
* Energy Efficient Lighting
 
   
 
This article will explore the options to address energy efficiencies in these areas.
 
This article will explore the options to address energy efficiencies in these areas.
  +
  +
   
   
Line 57: Line 60:
   
   
  +
=Energy Efficient Window Film=
 
 
==Energy Efficient Window Film==
   
 
[[File:Window_Film.jpg|thumb|350px|Energy Efficient Window Film]]
 
[[File:Window_Film.jpg|thumb|350px|Energy Efficient Window Film]]
Line 80: Line 84:
 
Unfortunately, it is not easy to determine your self if you have leaky ducts. The only way to be sure is to hire a professional heating/cooling expert that is setup with the equipment to do a thorough duct test. To do this, all of the vents where heating or cooling enters your living spaces are blocked (with tape or temporarily installed coverings) and then a blower is applied to the ducts to pressurize the duct system and then leakage is measured with a professional tool.
 
Unfortunately, it is not easy to determine your self if you have leaky ducts. The only way to be sure is to hire a professional heating/cooling expert that is setup with the equipment to do a thorough duct test. To do this, all of the vents where heating or cooling enters your living spaces are blocked (with tape or temporarily installed coverings) and then a blower is applied to the ducts to pressurize the duct system and then leakage is measured with a professional tool.
   
If it is determined that your ducts are leaky, they can either be fixed by replacing sections or sealing them with spray-on sealant or the duct system could be completely replaced.
+
If it is determined that your ducts are leaky, they can either be fixed by replacing sections or sealing them with tape or spray-on sealant or the duct system could be completely replaced.
  +
  +
In addition to sealing leaks, the energy efficiency of your ducts can be improved by adding insulation to the ducts if they do not have them. This insulation surrounds the ducts and further reduces heating or cooling loss.
  +
  +
  +
=Fixing Air or Thermal Leaks=
  +
  +
==Air Leaks==
  +
  +
In a house, there could be problem areas where there are air is allowed to leak from or into the house. This means heating or cooling is lost to the outside making your house less efficient than it should be.
  +
  +
Air leaks can come from many sources:
  +
  +
* Door and window frames
  +
* Mail chutes
  +
* Electrical and gas service entrances
  +
* Cable TV and phone lines
  +
* Outdoor water faucets
  +
* Where dryer vents pass through walls
  +
* Bricks, siding, stucco, and foundation
  +
* Air conditioners
  +
* Vents and fans.
  +
  +
[[File:Blower_Door_Test.gif|thumb|275px|Blower Door Test]]
  +
  +
A heating / cooling professional that is capable of doing a house leakage test will find leaks by executing a blower door test. For this test, a door is removed from the house and a blower door is temporarily installed that blocks the opening except for the section that icludes a blower or fan. When installed and turned on, air pressure will build in the house and special instruments will measure how air-tight your house is.
  +
  +
If the house is determined to be leaky, the professional will typcially walk around the house use a smoke pencil to emit a safe smoke that in areas that may be leaking that can then be seen emerging from the ouside of the house or into the attic or crawl space if an actual leak is present. The areas that are identified as leaky can then be fixed.
  +
  +
  +
  +
  +
  +
==Thermal Leaks==
  +
  +
[[File:Thermal_Imaging.jpg|thumb|left|Image From a Normal Camera]][[File:Thermal_Imaging_2.jpg|thumb|left|Thermal Image]]
  +
  +
  +
Thermal leaks are areas that could come from air leaks, but may also be areas where heating or cooling is escaping without any air leakage. These leaks are often hidden. An example of this type of leak is an area in a walls or ceilings that don't have adequate insulation or where the insulation was improperly installed or damaged. These types of leaks cannot be detected with a blower test (see above) so require another method to identify called thermal imaging.
  +
  +
Thermal imaging uses a special camera to identify which makes areas of heat or cold easily that are different from the surrounding areas easily identifiable.
  +
  +
The images to the left show a an area around a window usig a normal camera and using a thermal camera . With the thermal image, you can clearly see that there is a an area around the window that has a thermal leak that is not visiable from either the inside or outside that needs to be addressed.
  +
  +
Thermal imaging is typically done by a professional because the best thermal cameras can be very expensive, but if you have one or want to buy one, using it to find hidden leaks in your house can be relatively easy. However, some hidden leaks can be very subtle so it may be easy for a an inexperienced person to miss the leak when looking at a thernal image.
 
[[Category:Sustainable living]]
 
[[Category:Sustainable living]]

Revision as of 20:20, 29 March 2012

Energy Efficient House

There are many ways to make your house more energy efficient and save money in the process.

They include:

  • Upgrading Attic Insulation
  • Energy Efficient Window Film
  • Fixing or Replacing Leaky Air Ducts
  • Fixing Air or Thermal Leaks
  • Energy Efficient Lighting
  • Energy Efficient Furnace or Air Conditioning


This article will explore the options to address energy efficiencies in these areas.



Attic Insulation

Reducing house heat or cooling loss through the attic can we one of the best things to focus on to make your house more energy efficient -- especially if it is an older house. There are a number of options to consider here.

Fiber Insulation

Fiber Insulation

Fiber insulation is typically blown into the attic or laid down in rolled sections called batts. Fiber can be made out of fiberglass, cellulose, mineral wool or sheep's wool. Fiber insulation in the attic is placed between and on top of the rafters. It reduces energy loss by stopping heat or cool from escaping from your living areas into the attic.

Each of these materials have "R" values which represents the materials resistance to heat flow. The higher the R value, the better the insulation of that material and, in general, the more expensive the material is. The amount of insulation or R-value you'll need depends on your climate, type of heating and cooling system, and the section of the house you plan to insulate.

Here's a good link to determine how much insulation to add to a new or existing house: Insulation Calculator

Rolled in insulation can be a fairly easy do-it-yourself project, but blown in insulation is almost often a professional job.

Blown in insulation has an additional advantage over rolled in insulation as it doesn't leave gaps in which heat or cool can escape.

Spray-In Foam Sealing

Spray-In Foam Insulation


Spray-in foam sealing is a different approach to energy loss and is becoming more popular in new home construction. The foam is generally made polyicynene or polyurethane although other variants exist.

Spray in foam is almost always professionally installed and is applied to the underside of your roof and completely seals the attic from any air leaks from the attic.

This approach is very energy efficient and substantially reduces the temperature of your attic in the summer and increases it in the winter as the temperatures more closely represent those that are in your living spaces. An additional benefit of spray in foam is that it is also a noise barrier.


Thermal Shield

Radient Barrier Insulation

A thermal shield is also a reasonably new method of insulation. A thermal shield is a thin layer (looks like tin foil) that reflects radiant heat escaping from your living areas back into them instead of letting it escape into the attic. When installed in the attic, it can be either laid on top of the rafters, or applied to the underside of the attic roof or a combination of both.





Energy Efficient Window Film

Energy Efficient Window Film

The U.S. Dept. of Energy estimates that during the summer up to 60% of a home’s cooling energy is lost through its windows and during the winter up to 25% of a home’s heating energy is lost through its windows.

If you have very old single pane or leaky widows the best option is to replace them. However, if you have window that aren't leaky, their energy performance can be substantially improved by adding energy efficient window film.

This film allows most visible light to pass through (usually around 80%), they blocking almost all (usually close around 98%) of harmful ultraviolet light from entering the house, and they block most infrared solar heat from penetrating the window. This means that in the summer about 70% of solar heat is prevented from entering your house and in the winter, about 40% of heat is prevented from escaping to the outside through your windows. There are many manufacturers of these products and you can dial the performance you'd like to certain level.

Energy efficient window films can be installed professionally or they can be a do-it-yourself project.


Fixing or Replacing Leaky Air Ducts

Duct Testing

This should be a big area of focus for older houses with forced air heating and/or cooling. The problem is, that over time, the duct system that carries the hot or cool air develops leaks and becomes inefficient. Since the ducts typically run through the attic, or in the basement or under-house crawl space, the leaks mean heat or cool is lost to non-living spaces. With an older house or in a house where ducts could have been damaged, leakage could range up to 50% or more which is a huge loss of energy efficiency and money waste.

Unfortunately, it is not easy to determine your self if you have leaky ducts. The only way to be sure is to hire a professional heating/cooling expert that is setup with the equipment to do a thorough duct test. To do this, all of the vents where heating or cooling enters your living spaces are blocked (with tape or temporarily installed coverings) and then a blower is applied to the ducts to pressurize the duct system and then leakage is measured with a professional tool.

If it is determined that your ducts are leaky, they can either be fixed by replacing sections or sealing them with tape or spray-on sealant or the duct system could be completely replaced.

In addition to sealing leaks, the energy efficiency of your ducts can be improved by adding insulation to the ducts if they do not have them. This insulation surrounds the ducts and further reduces heating or cooling loss.


Fixing Air or Thermal Leaks

Air Leaks

In a house, there could be problem areas where there are air is allowed to leak from or into the house. This means heating or cooling is lost to the outside making your house less efficient than it should be.

Air leaks can come from many sources:

  • Door and window frames
  • Mail chutes
  • Electrical and gas service entrances
  • Cable TV and phone lines
  • Outdoor water faucets
  • Where dryer vents pass through walls
  • Bricks, siding, stucco, and foundation
  • Air conditioners
  • Vents and fans.

Blower Door Test

A heating / cooling professional that is capable of doing a house leakage test will find leaks by executing a blower door test. For this test, a door is removed from the house and a blower door is temporarily installed that blocks the opening except for the section that icludes a blower or fan. When installed and turned on, air pressure will build in the house and special instruments will measure how air-tight your house is.

If the house is determined to be leaky, the professional will typcially walk around the house use a smoke pencil to emit a safe smoke that in areas that may be leaking that can then be seen emerging from the ouside of the house or into the attic or crawl space if an actual leak is present. The areas that are identified as leaky can then be fixed.



Thermal Leaks

Image From a Normal Camera

Thermal Image


Thermal leaks are areas that could come from air leaks, but may also be areas where heating or cooling is escaping without any air leakage. These leaks are often hidden. An example of this type of leak is an area in a walls or ceilings that don't have adequate insulation or where the insulation was improperly installed or damaged. These types of leaks cannot be detected with a blower test (see above) so require another method to identify called thermal imaging.

Thermal imaging uses a special camera to identify which makes areas of heat or cold easily that are different from the surrounding areas easily identifiable.

The images to the left show a an area around a window usig a normal camera and using a thermal camera . With the thermal image, you can clearly see that there is a an area around the window that has a thermal leak that is not visiable from either the inside or outside that needs to be addressed.

Thermal imaging is typically done by a professional because the best thermal cameras can be very expensive, but if you have one or want to buy one, using it to find hidden leaks in your house can be relatively easy. However, some hidden leaks can be very subtle so it may be easy for a an inexperienced person to miss the leak when looking at a thernal image.